Skip to content
Edinburg Elite Custom Cabinets

Edinburg Door & Drawer-Front Refacing Residential & Commercial

Door & Drawer-Front Refacing in Edinburg, TX

Edinburg Elite Custom Cabinets provides professional door & drawer-front refacing in Edinburg, TX for residential and commercial properties across Hidalgo County. Refacing is new doors, new drawer fronts and fresh veneer over the face frames and end panels you already own. It is the correct purchase when the boxes are sound and a waste of money when they are not, so we check before quoting.

Sound means specific, checkable things. The carcass is plywood, or a particleboard core still hard and flat. Face frames are solid wood with tight joints. The run is square and level. The sink base floor is dry. Hinge screws still bite. Any one of those failing changes the recommendation, and we show you which one did.

Refacing cannot move a wall, change a box's height or depth, fix a shelf sagging inside a cabinet we are not replacing, or widen an opening for a thirty-six-inch cooktop. It also will not rescue a run that is out of level, because new doors hang truer and make a crooked reveal more obvious, not less.

Hidalgo County has a great deal of housing from the 1970s through the early 1990s with site-built face-frame cabinets in oak or pine. Those carcasses are often better than what would replace them. Dark stain, yellowed lacquer and a cathedral-arch door are appearance problems, and appearance is precisely what refacing buys.

The work is climate-sensitive and we schedule around it. Contact cement flashes off faster in heat and slower in damp air, and veneer laid before the solvent is gone bubbles months later. We keep the air conditioning running, degrease frames with a solvent wipe rather than a household cleaner, and roll every square inch with a J-roller.

A door and drawer-front change with new concealed hinges and hardware lands well under a replacement, and it runs in days rather than weeks with the kitchen usable most nights. If we open your sink base and find a swollen deck, we will say replace, and we will hand you the reason in writing.

Our licensed and insured team brings the right materials and equipment to every job — three-quarter-inch plywood carcass stock, three-ply wood veneer over face frames, rigid thermofoil door skins, five-piece paint-grade MDF doors, six-way concealed soft-close hinges, full-extension undermount drawer slides — and backs the work with a written workmanship warranty. We serve Edinburg and nearby communities including McAllen, Pharr, Mission, San Juan.

What We Handle

Everything our door & drawer-front refacing in Edinburg covers

One crew, one point of contact, and the full range of door & drawer-front refacing work in Edinburg, TX. If it is on this list we do it in house rather than handing it to a subcontractor:

  • cabinet refacing
  • cabinet door replacement
  • drawer front replacement
  • cabinet veneer
  • cabinet refinishing
  • cabinet painting
  • reface kitchen cabinets
  • rigid thermofoil doors
  • cabinet resurfacing
  • kitchen cabinet makeover
  • cabinet restoration

Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Edinburg services.

Materials, equipment and how we do door & drawer-front refacing

The difference between door & drawer-front refacing that lasts and door & drawer-front refacing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with three-quarter-inch plywood carcass stock, three-ply wood veneer over face frames, rigid thermofoil door skins, five-piece paint-grade MDF doors, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.

Every Edinburg job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of cabinet work in Hidalgo County means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.

Where we do door & drawer-front refacing outside Edinburg

Edinburg Elite Custom Cabinets covers Edinburg and the surrounding communities of Hidalgo County. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.

Start on the Edinburg Elite Custom Cabinets homepage for a free estimate, or call (844) 511-2320 and describe the job.

Why Edinburg Chooses Edinburg Elite Custom Cabinets

  • We inspect the carcass before quoting and price refacing and replacement side by side
  • Boxes built from three-quarter-inch furniture-grade plywood, never particleboard
  • Doors and panels sprayed with catalyzed conversion varnish in our own shop
  • Six-way concealed soft-close hinges and full-extension undermount slides as standard

The standards behind door & drawer-front refacing

Quality here is not a matter of opinion — it is written down. The door & drawer-front refacing work we do in Edinburg follows published industry standards: KCMA runs the ANSI/KCMA A161.1 cabinet performance certification, and National Kitchen & Bath Association publishes the kitchen planning guidelines. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.

Every door & drawer-front refacing project in Edinburg gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.

Ready to get started? Call (844) 511-2320 for a free door & drawer-front refacing free estimate in Edinburg, or request a quote and we'll get right back to you.

Related Services

Door & Drawer-Front Refacing in Edinburg: Common Questions

How much does door & drawer-front refacing cost in Edinburg, TX?

It comes down to square footage, access, the condition of what is already there, and the materials you choose — three-quarter-inch plywood carcass stock, three-ply wood veneer over face frames, rigid thermofoil door skins. We do not price a job off a phone call and a guess. We measure on site and hand you an itemized free estimate with the scope written out, so you can compare it line by line against anyone else's number.

How long does a door & drawer-front refacing job take?

Most residential door & drawer-front refacing work in Edinburg runs from a single day to about a week once materials are on site. Larger commercial jobs get phased so the property keeps operating. Weather, permit review and material lead times are the usual reasons a date moves, and you hear about those from us before the crew starts, not after.

Do you pull permits and handle inspections in Edinburg?

Yes, on any work that needs one. We file with the Edinburg building department, schedule the inspection and stay on site for it. Skipping a permit is how property owners end up paying twice — once for the work, and again when it fails at resale or an insurance claim.

Is Edinburg Elite Custom Cabinets licensed and insured?

Licensed cabinet and remodeling contractor. Fully insured and bonded. Kitchen Cabinet Manufacturers Association member. Every door & drawer-front refacing job carries Written workmanship warranty on every job. Ask any contractor for those four things in writing before you sign — the ones who hesitate are telling you something.

Do you take commercial cabinet work as well as residential?

Both. Edinburg Elite Custom Cabinets runs residential door & drawer-front refacing across Edinburg neighborhoods and commercial work for offices, retail, restaurants, apartment complexes and HOA properties throughout Hidalgo County. Commercial jobs get phased scheduling and off-hours crews so tenants and customers are not shut out while the work happens.

Call Now